Concrete Driveways, Patios & Pavers in Orlando, FL

Concrete and pavers are only as good as what's under them. Florida's sandy soil and heavy rain mean the base prep, thickness, and drainage decide whether a slab or driveway lasts or cracks and settles.

We build driveways, patios, walkways, paver installations, and retaining walls for Orlando homes, with the grading and drainage detail that keeps water moving away from the house.

Orlando’s housing runs from 1920s–40s bungalows in College Park, Delaney Park and Audubon Park and the historic districts around downtown, through 1950s–70s ranch neighborhoods, to new construction in Lake Nona and Baldwin Park. The city permits inside its limits; many homes with an Orlando mailing address — in Conway, Dr. Phillips or Azalea Park, for example — are in unincorporated Orange County, which permits there. For concrete and pavers, it means getting the base, thickness and drainage right for sandy soil and heavy summer rain.

Orlando's housing runs from the 1920s–40s bungalows of College Park, Delaney Park and Audubon Park — narrow ribbon driveways, brick streets and historic-district review of street-facing changes — through the 1950s–70s ranch neighborhoods where original driveways and carport slabs are replaced on a new base, to Baldwin Park and Lake Nona, where alley-loaded lots and architectural review boards set what a paver patio or driveway extension can look like.

Inside the city limits, the right-of-way permit for a driveway apron and the building permit for a retaining wall go through City of Orlando Permitting Services; Conway, Dr. Phillips and Azalea Park addresses are usually unincorporated Orange County. A patio slab with no structural work is often exempt; we confirm the scope first.

We do not publish a standard duration for concrete and paver work — the area, the base work and the weather set it — so the written schedule you get with the estimate carries the dates, including the curing time before vehicles. The stages are the same everywhere.

1. Site visit and measure — the existing surface, the soil and base, where water goes now, the driveway apron and the right-of-way, access for the equipment and the concrete truck.
2. Scope, material and layout — poured, stamped or paver; thickness and reinforcement; edging, borders and drains; the square footage priced line by line.
3. HOA review and permits — driveway width, materials and colours approved where the community reviews them; the right-of-way permit for the apron and the building permit for retaining walls filed with City of Orlando Permitting Services.
4. Excavation and base — the old surface out, the base cut to grade, compacted in lifts and pitched away from the house.
5. Forms and reinforcement or edge restraint — forms, rebar or mesh and control-joint layout for concrete; bedding sand and edge restraint for pavers.
6. Pour or lay — the slab placed, finished and saw-cut, or the pavers laid, cut, compacted and jointed with sand.
7. Cure and close-out — the slab kept off limits while it cures, inspections called where a permit applies, the site cleaned, a walkthrough with you.