Concrete Driveways, Patios & Pavers in Winter Park, FL

Concrete and pavers are only as good as what's under them. Florida's sandy soil and heavy rain mean the base prep, thickness, and drainage decide whether a slab or driveway lasts or cracks and settles.

We build driveways, patios, walkways, paver installations, and retaining walls for Winter Park homes, with the grading and drainage detail that keeps water moving away from the house.

Winter Park is known for brick streets, lakefront lots and 1920s–1950s homes around Park Avenue, Rollins and Olde Winter Park, many under historic or neighborhood design review, alongside 1960s Winter Park Pines and newer Windsong. The city’s permitting and tree rules are stricter than most of its neighbors’. For concrete and pavers, it means getting the base, thickness and drainage right for sandy soil and heavy summer rain.

Winter Park's 1920s–50s homes around Park Avenue, Rollins and Olde Winter Park sit on brick streets and lakefront lots under historic or neighborhood design review, and the city's tree rules govern any slab or driveway near a protected tree's roots, so patios and driveways there are designed around the trees and the review; 1960s Winter Park Pines and newer Windsong bring driveway replacement, concrete patios off the lanai and paver walkways.

The right-of-way permit for the apron and the building permit for a retaining wall go through the City of Winter Park Building Division, whose permitting and tree rules are stricter than most neighbors'; a patio slab with no structural work is often exempt, but a tree permit may still apply. We confirm the scope first.

We do not publish a standard duration for concrete and paver work — the area, the base work and the weather set it — so the written schedule you get with the estimate carries the dates, including the curing time before vehicles. The stages are the same everywhere.

1. Site visit and measure — the existing surface, the soil and base, where water goes now, the driveway apron and the right-of-way, access for the equipment and the concrete truck.
2. Scope, material and layout — poured, stamped or paver; thickness and reinforcement; edging, borders and drains; the square footage priced line by line.
3. HOA review and permits — driveway width, materials and colours approved where the community reviews them; the right-of-way permit for the apron and the building permit for retaining walls filed with City of Winter Park Building Division.
4. Excavation and base — the old surface out, the base cut to grade, compacted in lifts and pitched away from the house.
5. Forms and reinforcement or edge restraint — forms, rebar or mesh and control-joint layout for concrete; bedding sand and edge restraint for pavers.
6. Pour or lay — the slab placed, finished and saw-cut, or the pavers laid, cut, compacted and jointed with sand.
7. Cure and close-out — the slab kept off limits while it cures, inspections called where a permit applies, the site cleaned, a walkthrough with you.